Can’t perform D’Link DAP 1320 Setup?
Are you unable to perform D’Link DAP 1320 setup? If your answer is a big yes, then there is nothing to worry about. In this post, we have provided the reasons that have stopped you from doing extender setup along with the fixes to troubleshoot the issue in an instant. Let’s get the ball rolling!
Why You Cannot Set Up D-Link DAP 1320?
There are a few common yet major reasons that caused the setup-related issues. All the possible reasons are highlighted below. Kindly have a quick look at them:
- Connectivity issues between your WiFi extender and router
- No Ethernet or wireless connection between your range extender and your client device (PC or laptop)
- You have not followed and performed D’Link DAP 1320 setup instructions in a correct manner
- Insufficient or no power supply to the extender can also cause the setup-related issues
- Last, but not least, technical glitches! A minor technical glitch can stop you from doing D’Link DAP 1320 setup
That’s all! These were the common yet topmost reasons that have caused the issue. Head towards the next section and know how to troubleshoot it in a flash. Keep reading and don’t scroll away.
Fix: Can’t Do D’Link DAP 1320 Setup
Power Cycle Your WiFi Extender
First things first, start fixing the issue by simply restarting or power cycling your WiFi range extender. Apply the steps highlighted below in the exact given order and know how to give the extender a fresh start:
- Turn your D’Link DAP 1320 extender off
- Keep it off for 5-10 minutes
- Now, you can turn on your WiFi extender
- Wait for the LEDs on the device (extender) to start blinking
Ensure Steady Power Supply
Make sure that your WiFi extender is operating on a steady power. On the off chance, the extender is not plugged in or receiving continuous power, then you may get issues while setting it up. Why? If your extender is not powered on, then how will you set it up? Or, if the electricity is fluctuating, then also extender setup process will be impossible.
That is why, we have said, a continuous/ steady power supply to the extender from a working wall socket during the extender setup process is more than important.
Connect Your Networking Hardware Properly
You may not get success with the extender setup process if you have not connected your WiFi range extender and your router. So, kindly connect them (extender and router) using an Ethernet or wireless source.
Also, ensure that they don’t get disconnected from each other while the setup process is going on.
Be Sure About Accessing Extender’s Network
Now comes the most important step. To execute and complete the extender setup process using the manual instructions, you must have access to the D’Link DAP 1320 setup page. And, you can access the setup page using dlinkap.local web address.
But, the web address will not work for you if you haven’t connected the WiFi range extender and your client device (desktop or laptop). Also, no connection between the extender and your client device may not let you complete the extender setup process.
So, make a secure yet solid connection between them either using a wired or a wireless source.
Follow the Instructions Carefully
The extender setup issue is faced by those users who haven’t implemented the process correctly. And, for correct implementation of the process, you have to follow and apply the instructions in the exact way they are provided.
So, for extender setup manual instructions, you have to:
- Open an internet browser. Make sure you use an up-to-date one.
- Enter dlinkap.local in the address bar.
- Provide the extender’s admin password into the required fields.
- Thus, the extender setup page displays.
- Follow on-screen instructions.
We hope that after applying the fixes listed above and following the extender setup instructions in the exact given order, you are able to troubleshoot the issue in discussion right from the comfort of your home.
The Last Words
D’Link DAP 1320 WiFi range extender is a great device that provides its users a steady yet blazing-fast internet to access on every connected device all over the home. But, the thing is – you have to set it up in a proper manner. And, if you face any sort of issues while setting it up, this post would be of great help to you.
Now, we are going to end up this post. We really hope that after applying the fixes we have provided here, you will be able to troubleshoot can’t perform D’Link DAP 1320 setup issue.