Red Light Issue On D-Link Extender- Troubleshooting Steps
The red light issue on D-Link extender indicates that there is something wrong with your internet connection. So, you must have a look at your internet connection and verify whether it is working fine or not. On the other hand, there can be many other factors leading to red light issues on D-Link extender. Need not to worry! Look, no matter whatever is the reason causing the red light issue on D-Link extender, know that we have got you covered. In this post, we have jotted down the troubleshooting tips to mend the issue in discussion. Given that, continue reading the blog post.
[Fixed] Red Light Issue on D-Link Extender
Now, the time has come to apply the troubleshooting steps to fix red light issue on D-Link extender. So, keep scrolling down and know the techniques to deal with the red light issue.
Power Cycle Your D-Link WiFi Extender
Start troubleshooting the D-Link WiFi extender red light issue by trying this versatile fix. Yes, power cycling! This is known as the best fix for fixing many big and small issues with D-Link WiFi range extender.
The steps you need to follow in order to restart or power cycle your D-Link extender are outlined underneath:
- Unplug your D-Link extender and wait for 10 minutes.
- Plug in back your range extender. The lights on your range extender will start blinking green.
This indicates that your D-Link WiFi extender has booted up and you can access its dashboard via dlinkap.local to configure its settings.
Place Your D-Link Extender and Router Closer
If there is a huge distance between your D-Link extender and your host router, then also the red light issue can trouble you. To do away with this problem, you need to place them at a safe distance.
While placing your D-Link extender and your host router closer, make sure that you won’t place anyone of them inside closet, lower shelf, in corner, or back of any device.
Connect Your Router and D-Link Extender
Remember that, there is no connection between your D-Link WiFi extender and your host router, then also the red light issue can trouble you. Hence, to deal with the issue, ensure to connect your D-Link WiFi extender and your router by either using a wired or using the WPS source.
Set Up D-Link Extender Properly
Improper DLink extender setup can also lead to the red light issue. So, you have to make sure that you have set up the extender in a proper way. In the event, you don’t know the correct procedure to perform the DLink extender setup process, you may refer to the term highlighted below in this post.
After setting up your D-Link WiFi extender, you can unplug it at place it anywhere in your house. Remember that, the location for your WiFi range extender must not be away from the range of your host router.
Update Firmware
Is the firmware of your D-Link extender outdated? It looks like the firmware is outdated. Well, you need to check that once. if you find DLink extender firmware outdated, update it right away and get rid of the red light issue.
Call Your ISP
If none of the troubleshooting steps listed above proves helpful to fix red light issue on D-Link extender issue, then you must call your ISP. Perhaps, your internet connection is not stable and working smoothly. No worries! To make the most out of your internet connection, you need to call your ISP right away. If you find the internet-related problems persist from his end, you need to ask him to get the problem resolved as soon as possible.
Reset and Reconfigure D-Link WiFi Extender
D-Link extender factory reset hack is recommended when no other hack help you fix red light issue on D-Link extender. It is known as the best yet universal hack to fix major and minor issues with your D-Link device. Thus, wait no more and know how to take your WiFi range extender back to factory default values.
To reset your D-Link WiFi range extender, you have to disconnect it from your host router. Once you are done with disconnecting them, look for the reset hole/ button on your D-Link device. Once you find it, press it using a paper clip, hold it for 10 seconds, and release it.
The LEDs on your D-Link extender will start blinking green. Using dlinkap.local web address, perform DLink extender setup process from scratch.
To Sum Up
That was all about our troubleshooting post on how to fix red light issue on D-Link extender issue. We hope that the hacks we have outlined above will help you.
To prevent you from facing the same issue again in future, bookmarking this post is suggested. Why? Because we don’t want you to waste your precious time more on internet in search of fixes for the same issue i.e. red light issue on D-Link extender.
Now, with the hope of helping you, we are going to end our blog!